Physical index:
Appearance: light amber liquid
Solubility: easy to dissolve in water
Ionicity: Non-ionic
Compatibility: Compatible with most non-ionic and anionic additives, and can be used with other finishing agents at the same time, but compatibility testing should be done in advance
performance
1 is to prevent yellowing and color change caused by nylon and its elastic fabrics before or after high-temperature setting;
2 It is used for preforming the fabric, which can reduce the occurrence of streaks during dyeing;
3 It is used for the pressing mold of nylon or nylon puller cloth white or light-colored cloth to prevent the color change;
4 Does not contain APEO and organic solvents;
5 Suitable for padding method

Application
Pre-setting
Padding method
20-40G/L AN
PH value 5.0-6.0 (adjusted with HAC or citric acid)
180℃-190℃ heat setting for 30-60 seconds


Post-setting
Padding
20-40G/L AN
PH 5.0-6.0 (adjusted with HAC or citric acid)
150℃-180℃ drying
Exhaustion method:
1-2% AN
PH 5.0-6.0 (adjusted with HAC or citric acid)
Run at 50℃-60℃ for 20-30 minutes

Storage and packaging Plastic barrel,the original packaging can be kept for 24 months