Your position: Home > Application > Yarn
Anti-siphon agent T06
2019-12-26
Physical and chemical indicators
Appearance: milky white liquid
Ionicity: Weak cation
PH value: 4～7
Solubility: easily soluble in water
Performance
1. The fabric finished by this product has remarkable waterproof ability, which makes the yarn have excellent
Siphon effect
2. Compared with the general coating water repellent finishing, this product has excellent breathability, not
It will change the color, appearance and other properties of the fabric.
No-iron finishing can be carried out at the same time without affecting each other.
3. This product is environmentally friendly and non-toxic to human body.
Scope of application
This product is suitable for waterproof finishing of polyester, nylon and other chemical fiber fabrics.
Application
1 Padding:
Anti-siphon agent T06: 10～70g/L (depending on the nature of the fabric)
Padding method: one padding and one rolling (depending on the nature of the fabric)
65～75% Baking temperature: 150℃×70 seconds (depending on the nature of the fabric)
2 Impregnation:
Anti-siphon agent T06: 2%-5% (O.W.F)
After drying at 150℃ for 1.5 minutes
[Notes] 1. In order to ensure a better treatment effect, the front of the fabric to be finished
The management must be good, the surface must be dry and clean, no residual chemicals and other substances;
2、this The product must be stirred evenly before use, and prepared with qualified printing and dyeing water;
3、This product It is non-toxic and harmless. When using it, be careful not to splash into the eyes or touch the mucous membrane and skin.
If this happens, it can be rinsed with plenty of water.
Packaging and storage
Appearance: milky white liquid
Ionicity: Weak cation
PH value: 4～7
Solubility: easily soluble in water
Performance
1. The fabric finished by this product has remarkable waterproof ability, which makes the yarn have excellent
Siphon effect
2. Compared with the general coating water repellent finishing, this product has excellent breathability, not
It will change the color, appearance and other properties of the fabric.
No-iron finishing can be carried out at the same time without affecting each other.
3. This product is environmentally friendly and non-toxic to human body.
Scope of application
This product is suitable for waterproof finishing of polyester, nylon and other chemical fiber fabrics.
Application
1 Padding:
Anti-siphon agent T06: 10～70g/L (depending on the nature of the fabric)
Padding method: one padding and one rolling (depending on the nature of the fabric)
65～75% Baking temperature: 150℃×70 seconds (depending on the nature of the fabric)
2 Impregnation:
Anti-siphon agent T06: 2%-5% (O.W.F)
After drying at 150℃ for 1.5 minutes
[Notes] 1. In order to ensure a better treatment effect, the front of the fabric to be finished
The management must be good, the surface must be dry and clean, no residual chemicals and other substances;
2、this The product must be stirred evenly before use, and prepared with qualified printing and dyeing water;
3、This product It is non-toxic and harmless. When using it, be careful not to splash into the eyes or touch the mucous membrane and skin.
If this happens, it can be rinsed with plenty of water.
Packaging and storage
Packed in plastic barrels lined with plastic bags. Store away from light. Store at a temperature of 5℃～35℃. Keep away from fire. Do not place it open. After use, the lid should be closed in time to prevent evaporation and mixing of impurities. It can be stably stored in the original packaging for 10-12 months. If the product is stored for a long time, there may be a small amount of precipitation, which is normal. Please mix well before use.
